Sort by:
A Very RARE General Electric Pancake Oscilator Fan, 12 inches blades, Not TESTED, Sold as Is, for Restoration Proyect.Cast Iron in Good Shape, No Cracks, The blade cage supports are not in the Original position, someone do new threaded holes on front iron plaque. Engine...
Vintage Metal Foot Stool Hassock Round Floor Fan Antique 1940's Emerson USA.
This is an antique working Myers and Robbins desk fan that measures 16" from tabletop to top of safety cage, 4 blade fan is 12" across and safety cage is 13" across. Has a low and high speed as well as off and looks to be a oscillating fan but that featur...
Antique 12" brass Emerson 1510 fan as shown. This fellow works, but I think the starter motor is catching and you can here the clicking throughout a run. Japan paint probably original considering a lot of it is missing around the ornate base. I posted the fan runni...
Antique Emerson Seabreeze Table Fan 7-1/2” blade. Model 3140-B. It runs, but makes some noise. May need oiling. Cast iron base. The cord has been spliced - would need replacing. Non- oscillating.
VTG 1920'S EMERSON 29648 16" BRASS BLADES FAN DESK ANTIQUE ELECTRIC MULT SPEED Gorgeous vintage Emerson Fan with Brass blades. For parts or restoration. cord was cut off, may need gone thru..... Many more unique items to be listed soon!!! Check back. Please see all...
Emerson 12 inch brass blade & cage and balanced with no vibrations type # 29646 volts 110, AC fan motor cycles 50 Runs and starts right up weight is 21 Lbs. Height 18", wide 13", depth 9". Has 3 speeds with difference in the 3 speeds. there is no ding...
Western Electric Co. Hawthorn 12 inch brass blade & cage and balanced with no vibrations Style W-134031 volts 100-110, AC fan motor Serial # 318431 cycles 60 Runs and starts right up and has tight bearing no play. weight is 23 Lbs. Height 16", wide 13", de...
General Electric 12 inch brass blade & cage and balanced with no vibrations Style # 770687 volts 110, AC fan motor NP # 6252 cycles 60 Runs and starts right up weight is 25 Lbs. Height 18", wide 13", depth 11". Has 3 speeds with difference in the 3 sp...
SEE ALL PHOTOS AND READ THE ENTIRE ITEM DESCRIPTION / SELLER POLICIES BELOW I AM CURRENTLY LISTING A FEW ANTIQUE ELECTRIC TABLE FANS FRESH OUT OF A WASHINGTON DC AREA ESTATE. THEY WERE ALL FOUND EITHER STORED IN THE CLOSETS OR THE BASEMENT. THE FANS HAVE NOT SEEN THE LI...
Antique Vintage 15" METAL FAN BLADE ~ Steampunk Wall Art ~ Parts ~ Restoration Vintage used condition. Rustic patina with missing old white paint giving it a nice "old patina". Selling for parts or decorative. Please see closeup view of pictures for furth...
This is a Vintage Mid Century Eskimo 20" Box Fan. This classic box fan is All Metal and was made by the McGraw Edison company and is model #20136. It is a Teal Blue color and is a single speed. Comes with the original hang tag that was attached to handle. Great Wor...
Antique 9" General Electric GE 55X165 Oscillating Fan Beige NO RESERVE. Nice, fan. Runs well. Has developed an issue with a rattle during oscillation on one side of fan. Check it out on this link to YouTube: https://www.youtube.com/watch?v=-JZYeii7KE0 So the fans s...
Vintage Emerson/Electric Pedestal Floor Fan Art Deco!, no. 6250-AK, works great Fan has been rewired, osillating, single speed on/off switch, brass blade, adjustable height, does have paint chips on back of case. See pic 2, other then that nice old fan Pics are of actua...
WINDMERE 7" 2 SPEED OSCILLATING TABLE FAN Oscillating Table / Desk Fan Tested powers on and works great!
800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 All items are shipped UPS Ground Or USPS. Items will usually ship within 3-5 Business days NO INTERNATIONAL BIDS. I will only accept returns if the item is not as described, most of the it...
Original 1950's Westinghouse Electric Fan. One Speed, Oscillating electric fan. Professionally Restored. This fan is original. Fan measures 13 inches tall with a 10 inch Blade The entire body has was, detergent washed, glass blasted, hand sanded, primed and repainted us...
BARN FIND 1922 Emerson 29646 12" Brass Blade 3 Speed Oscillating Antique Fan. Old barn find. Its working on all 3 speeds but oddly its spinning backwards. It probably needs wires switched somewhere but im just going to let you resotre it so Its sold as is barn find...
Antique The Dayton Fan & Motor Co 12 Inch blades 14" wide 14 Fan TYPE 52 Works Fan works great, looks like brass blades. Toggle switch doesn't work to shut it off, must unplug it.Condition as shownMailing is $29.75 in the Cont. U.S.
*PLEASE READ ALL CONTACT AND PAYMENT INFORMATION PRIOR TO BIDDING - THANK YOU * A VINTAGE EMERSON MODEL 77648-SO 3 SPEED OSCILLATING TABLE FAN. 16" BLADE. WORKS GREAT!! RUNS SMOOTH AND QUIET AND SERIOUSLY CIRCULATES THE AIR. COSMETICALLY IN REALY GREAT CONDITION AS...
Selling as is parts repair just hums , size on pictures steel blades look at pictures I try my best to describe pictures are the best description. If i made a mistake in listening please let me know. I do not inflate shipping but I do add weight for packaging and shippi...
Vintage R&M Robbins & Myers Art Deco Black w/Silver Electric Fan. Working. All speeds working. Turns only a little Wiring has duck tape. Sold as is
THIS FAN WAS TOTALLY DISMANTLED,CLEANED,LUBED,POLISHED,REPRIMED+PAINTED WITH QUALITY PRODUCTS ON STRIPPED BARE PARTS FOR A GREAT FINISH! ELECTRONICALLY TESTED+UPDATED WITH NEW"OLD STYLE"CLOTH WIRING THROUGHOUT.READY TO DO IT'S ORIGINAL JOB OR JUST SITT'IN PRET...
c.1913 Antique12" Westinghouse STYLE 162628AVariable-Speed Desk FanBrass Blades and Cage For Parts or Repair [ FEATURES AND DETAILS... ] c.1913 (The micro date is 8-18-13.) / 12" Blade Diameter This lovely fan needs TLC. Specifically, it needs to be rewired be...
Antique General Electric Form AOU Cat 75423 3 Speed Oscillating Desk Fan.. Barn find untested for parts or repair. As is used condition.See pictures for description.Thank you for looking. Have fun!
Vintage Western Auto Wizard Yellow Metal 8” Desk Fan BE2000A-07 Tested ~ Works. Fan blade cover (where logo is) is on upside down. See photos for flaws- rusting areas on back.
Vintage Emerson Fan Motor with an Ornate Base
Antique Westinghouse Electric Fan 4 Brass Blades Works. nice looking fan it is working but the cage needs to be adjusted. the fan blades will hit the cage while it's on. Its missing one bolt that holds the cage arm to the base. The cord is a little bit crispy and probab...
Up for sale is an Antique Hackney Sanitary Electric Ventilating Fan. The fan has the antique ceramic screw plug. It does power on, but needs to be oiled/greased. My Grandfather has had this sitting in the ship since well before my time. Please see the pictures for measu...
12” brass blade GE AUU non-oscillating electric fan. Fan works. Hasn’t been cleaned or polished. Paint has its issues but it will polish out a good bit as well. Cage is straight. Might be missing a cap on the back but I’m not too familiar with this model. Buying the fan...
