Refurbished CNC & Metalworking Items For Industry

– 6849 offers
Sort by:
MACHINIST TOOL LOT 100 DRILL BITS HSS Sharp HSS purchased from an Aircraft Company. MISC SIZE AND LENGTHS Contains mostly numbered sizes with a few letter and fractional sizes. SIZE RANGE 3/32" TO 1/4" may include some number and letter sizes. Will ship to US...
MACHINIST TOOL LOT 100 DRILL BITS HSS
Hello, You are looking at one resharpened YG Roughing End Mill. It was professionally resharpened and is in great shape. 3.5” length with 1” Flute length with .06R Good Luck. Please feel free to e-mail me with any questions.
1" DIA. Carbide Roughing End Mill - YG 82600 Rougher - 1 Pc
(30) 1/4-28 Threaded Spiral Flute Reamers & Drill Bits ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Some are new old stock, some are used, some are regrinds, all are clean and sharp. Made in the USA or Canada If you buy more then 1 item please wait for a invoice before paying,...
(30) 1/4-28 Threaded Spiral Flute Reamers & Drill Bits ~ Aircraft Tools
Roper Whitney no 7 HAND PUNCH
Roper Whitney No. 7 HAND PUNCH
Hello, You are looking at One resharpened GARR three flute End Mill. Carbide. Diameter is .990 and overall is 3.5” It was professionally resharpened and is in great shape. Good Luck. Please feel free to e-mail me with any questions.
Garr Three Flute End Mill 1” Diameter - 1 Pc
1” X 3” X 6” CARB/COATED 4FL HANITA END MILL RECONDITIONED/RECOATED .990 PERFECT. Condition is Manufacturer refurbished. Shipped with USPS Priority Mail. THIS WAS PROFESSIONALLY REGROUND(.990) WITH A WALTER CNC AND THEN RECOATED AlTiN/TiAlN. Please look at the pictures...
1” X 3” X 6” CARB/COATED 4FL HANITA END MILL RECONDITIONED/RECOATED .990 PERFECT
Hello, You are looking at one resharpened Garr End Mill. Carbide. Diameter is .620 and overall is 3.5” with 1.5”of Flute Lgth. It was professionally resharpened and is in great shape. TWO Flute Good Luck. Please feel free to e-mail me with any questions.
Garr End Mill 5/8” Diameter
**** 1pc **** 4 FLUTE - 1/2" DIAMETER - 30° HELIX - SQUARE END - REFURBISHED END MILLS CUT OFF AND REWORKED END TO STUB LENGTH. TOOLS MAY BE PARTIAL ALTiN COATED ON OD AND FLUTES ENDS WILL BE UNCOATED. 100% CNC REGRIND 1/2" 4FL SQUARE END REFURBISHED END MILLS...
CGS END MILL (1pcs) 1/2" 4FL SQ END STUB REFURBISHED CARBIDE EM * R240-5000EO
Hello, You are looking at one resharpened Garr End Mill. Carbide. Diameter is .740 and overall is 4.0”with 1.5”of Flute Lgth. It was professionally resharpened and is in great shape. TWO Flute Good Luck. Please feel free to e-mail me with any questions.
Garr End Mill 3/4” Diameter
3/4" 1-Flute Carbide 100 Degree Countersink MF32196 Diameter 3/4" Overall Length 2-1/2" to 3" Shank Diameter 3/8" Minimum Cutting Diameter 3/64" Carbide with Steel Shank Do not use for Chamfer milling
3/4" Carbide Countersink 1 Flute 100 Degree MF32196
You get a 50 each size #21 step to #10 M7 cobalt bits. They are about 6" long. These are premium aviation / machinist quality bits. Not China import junk! These were reground by US tool Grinding for Boeing Aircraft. They are the same quality as a new bit and just a...
50 Pc #21 To #10 X 6 " Step Drill M7 Cobalt Bit Pack USA Boeing Surplus
10 Micro Solid Carbide Router Bits Route .50 mm .0197" Hard to Find Carbide Micro Tools!10 Pieces .50 mm (.0197") Spiral Cut Flute Router Bits (endmills) 1/8" Shaft fits CNC RoutersOverall Length is 1 1/2" - Flute Length is .079" Constructed of...
TEN Pieces .020" - 0.50mm - Solid Carbide Micro End Mill Bits CNC PCB Dremel
MSC 4 x 3/32 x 1 34T HSS Side Mill Slitting Saw SHARP SHOWS SOME DISCOLORATION BUT IS IN VERY GOOD FUNCTIONAL CONDITION Maker Jewelers, Saw, Slitting, Slotting, Screw, Solid Carbide, Metalworking, Tooling, Cutting, Blades, Micro, Watch, Watchmakers, Mill, Machinist Lath...
MSC 4 x 3/32 x 1 34T HSS Side Mill Slitting Saw
UNUSED SOLID CARBIDE ENDMILL MANUFACTURER: IMCO MATERIAL: SOLID CARBIDE DIAMETER: .997" LENGTH OF CUT: 3" LOC OVER ALL LENGTH: 6" OVAL FLUTES: 4 SHARP CORNER: YES CENTER CUTTING: YES WELDON FLAT: NO CNC RESHARPENED! IF NOT ABSOLUTELY SATISFIED SEND IT BAC...
IMCO 1" INCH SOLID CARBIDE END MILL LONG 6" LENGTH MILLING LATHE CNC TOOL BIT
You get a 200 each size #40 step to #30 cobalt bits. These are premium aviation / machinist quality bits. Not China import junk! These were reground by US tool Grinding for Boeing Aircraft. They are the same quality as a new bit and just as sharp.
200 Pc #40 To #30 X 6 " Step Drill M2 Cobalt Bit Pack USA Boeing Surplus
4" Solid Carbide 1/4 Straight Flute Star Drill Bit Sterling Carbide 4" Over All Length 1-1/2" Flute Length (scale not included) Tool Crib Surplus ~ Clean & Sharp If you buy more then 1 item please wait for a invoice before paying, it will save you mon...
4" Solid Carbide 1/4 Straight Flute Star Drill Bit ~ Aircraft Tools
1" 4-Flute Cobalt NCC 90 Degree Angle Forming End Mill, MF4320235Diameter = 1.000" +/-.002"Angle = 90 DegreeOverall Length = 4.350" +.200" / -.000"Non-Center CuttingMinimum Cutting Diameter = 1/16"
1" 4-Flute Cobalt NCC 90 Degree Angle Forming End Mill, MF4320235
4" Solid Carbide 5/32 Straight Flute Star Drill BitSterling Carbide RC-3116-05 REV 'B' Star Drill 4" Over All Length 1" Flute Length (scale not included) Tool Crib Surplus ~ Clean & Sharp If you buy more then 1 item please wait for a invoice before pa...
4" Solid Carbide 5/32 Straight Flute Star Drill Bit ~ Aircraft Tools
CGS Made in the USA You are Bidding on REFURBISHED Carbide End Mills! 100% CNC REGRIND (3/8" DIAMETER) 5FL SQUARE END 2.4 - 2.75" OAL 30 DEGREE HELIX Approx 1 - 1.2" LENGTH OF CUT UNCOATED THANKS FOR LOOKING! We will combine shipping for those purchasing...
CGS END MILL (1pc) 3/8" 5FL SQ END REFURBISHED CARBIDE END MILL R150-3750EO
You get a 12 each size #40 X 6" drill bits and 12 each #40 step to #30 cobalt bits. 24 bits total. These are premium aviation / machinist quality bits. Not China import junk! These were reground by US tool Grinding for Boeing Aircraft. They are the same quality as...
24 Pc #40 & #30 X 6 " Step Drill M2 Cobalt Bit Pack USA Boeing Surplus
3/4" 4-Flute Cobalt NCC 60 Degree Angle Forming End Mill, MF4320249 Diameter = .750"" +/-.002"Length of Flute = 3/4" to 1-1/2" Angle = 60 DegreeOverall Length = 3.800" +.100" / -.050" Non-Center CuttingMinimum Cutting Diamete...
3/4" 4-Flute Cobalt NCC 60 Degree Angle Forming End Mill, MF4320249
50 Pc.-Ten Size- Micro Carbide End Mill Set - Sizes .021"-.063" Made in USA EV50 50 Pc.-Ten Size- Micro Carbide End Mill Set - Sizes .021"-.063" Made in USA EV50 Click images to enlarge Description Quantity Fifty Pieces Five Pieces of Ten Sizes Mill...
50 Pc.-Ten Size- Micro Carbide End Mill Set - Sizes .021"-.063" Made in USA EV50
3/4" (+.002 / -.005) 2-Flute HSS CC End Mill Radius .020" MF4000121115Diameter: .750" +.002 / -.005"Radius: .020" +/-.005" Length of Cut: 1.500" +/-.125"Overall Length: 3.625" +/-.125"Shank Diameter: 1/2"Added flat...
3/4" (+.002 / -.005) 2-Flute HSS CC End Mill Radius .020" MF4000121115
50 Pieces - 1/32" (0.80mm) 2 FLUTE CARBIDE ENDMILLS .110" LOC * Made in USA Click images to enlarge Description For sale are five (50) 1/32" (0.80mm) new carbide Endmill bits manufactured by Kyocera. INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING...
50 Pieces - 1/32" (0.80mm) 2 FLUTE CARBIDE ENDMILLS .110" LOC * Made in USA
3/4" (+/-.002) 2-Flute HSS FBCC End Mill Radius .060" MF401019522Diameter: .750" +.002 / -.002"Radius: .060" +/-.005"Length of Cut: 1.625" +/-.125"Overall Length: 3.875" +/-.125"Shank Diameter: 3/4"Flat Bottom Cente...
3/4" (+/-.002) 2-Flute HSS FBCC End Mill Radius .060" MF401019522
7/16" 2-Flute Carbide 100 Degree Countersink MF32184 Overall Length = 2-1/4" to 2-3/4" Shank = 7/16" Solid Carbide Do not use for Chamfer milling
7/16" 2-Flute Carbide 100 Degree Countersink MF32184
1" x 1/4" Carbide Head Key Seat Cutter, MF446125 Diameter = 1.000" +.015" / -.005" Width = .250" +/-.002" Shank = 1/2"Added Flat to Shank Overall Length = 2.250" +/-.100"808 Standard
1" x 1/4" Carbide Head Key Seat Cutter, MF446125
Watkins 4 x 0.045 x 1 100T Tin Coat Slitting Slotting Saw !RefurbishedSHARPSHOWS SOME DISCOLORATION BUT IS IN VERY GOOD FUNCTIONAL CONDITIONMaker Jewelers, Saw, Slitting, Slotting, Screw, Solid Carbide, Metalworking, Tooling, Cutting, Blades, Micro, Watch, Watchmakers,...
Watkins 4 x 0.045 x 1 100T Tin Coat Slitting Slotting Saw !
hello selling this set of transfer punches... bought it new.. never used it ...the oil on the punches collected some dust ..I wiped off what I could ... All these sets look the same to me.. from 65 to 300$... probably all made in the same place... Questions please ask
33pc Large Transfer Punch Set 1/2" to 1" by 1/64" 64th Machinist w/ Storage Rack
Show more