Sort by:
Vintage Port\Starboard match pair of Cast Bronze Chocks\Fairleads. Used to run dock\mooring lines through a bulwark or toerail on a vessel. 3 5/8" high. Slightly angled to follow the rise of the Gunwale. Nice solid used condition with marks from original casting vi...
THIS LISTING IS FOR A PAIR OF VINTAGE CAST SOLID BRONZE/BRASS? 4" CLEATS. THEY MEASURE APROX 5" LONG, BY 3/4" WIDE AT THE BASE AND STAND ABOUT 1" TALL. PLEASE CHECK OUT MY OTHER ITEMS FOR MORE VINTAGE AS WELL AS CURRENT BOAT HARDWARE. I AM HAPPY TO C...
THIS LISTING IS FOR A PAIR OF VINTAGE CAST SOLID BRONZE/BRASS? 5" CLEATS. THEY MEASURE APROX 5" LONG, BY 3/4" WIDE AT THE BASE AND STAND ABOUT 1" TALL. PLEASE CHECK OUT MY OTHER ITEMS FOR MORE VINTAGE AS WELL AS CURRENT BOAT HARDWARE. I AM HAPPY TO C...
THIS LISTING IS FOR A VINTAGE OLD PERKO BRONZE THROTTLE/SHIFTER, THIS IS AN OLD ONE WITH REALLY NICE PATINA. THE CAST BRONZE FACE PLATE MEASURES APROX 6" LONG BY APROX 2 1/2" WIDE, THE HANDLE STANDS APROX 5" ABOVE THE DECK LEVEL AND THE LOWER ASSEMBLY PRO...
THIS LISTING IS FOR A LARGE VINTAGE CAST POLISHED BRONZE/BRASS? MOORING BITT. IT HAS AN APROX 6" SQUARE BASE, AND STANDS ABOUT 5 1/2" TALL, IT IS ABOUT 9" WIDE AT THE ARMS. IT HAS AN APROX 1 1/2" CHAIN HOLE ON ONE SIDE. THERE ARE 3/8" COUNTERSUN...
THIS LISTING IS FOR A LARGE VINTAGE CAST POLISHED BRONZE MOORING BITT. IT HAS AN APROX 4 3/4" SQUARE BASE, AND STANDS ABOUT 4 1/2" TALL, IT IS ABOUT 8" WIDE AT THE ARMS. IT HAS AN APROX 1" CHAIN HOLE ON ONE SIDE. THERE ARE 3/8" COUNTERSUNK HOLES...
THIS LISTING IS FOR A VINTAGE, CAST BRONZE/BRASS R/P ANCHOR ROLLER WITH FAIRLEAD, I'VE SOLD A NUMBER OF THESE AND NEVER SEEN ONE THAT WASN'T ORIGINALLY CHROMED, THIS ONE HAS BEAUTIFUL AGE/PATINA TO IT. YOU CAN BUY RE-POPS OF THESE IN STAINLESS FOR $50 BUT THEY JUST DON'...
THIS LISTING IS FOR A VINTAGE CAST CHROMED SOLID (NOT HOLLOW) BRONZE/BRASS? CLEAT/CHOCK COMBO, IT HAS A UNIQUE DESIGN THAT I'VE NEVER SEEN BEFORE WITH THE APROX 1" WIDE VERTICAL CENTER CHANNEL FOR YOUR LINE TO RUN THROUGH. I HAVE A SIMILAR SMALLER ONE AND ALSO FROM...
THIS LISTING IS FOR A PAIR OF VINTAGE CAST SOLID BRONZE 6" CLEATS, IT'S A NICE FEATURE THAT THESE ARE SOLID CAST, NOT HOLLOW LIKE THE MAJORITY, I IMAGINE THEY ARE A LOT STRONGER. AT THE TIME THESE WERE LISTED, I LISTED ANOTHER PAIR FROM THE SAME BOAT IN A SEPARATE...
THIS LISTING IS FOR A PAIR OF VINTAGE CAST SOLID POLISHED BRONZE/BRASS? 5" ANVIL CLEATS WITH LARGE BASES. THEY MEASURE APROX 5" LONG, THE BASES MEASURE APROX 2 3/4" BY 1 3/4"AND STAND ABOUT 1 1/2" TALL. PLEASE CHECK OUT MY OTHER ITEMS FOR MORE V...
THIS LISTING IS FOR A LARGE VINTAGE CAST POLISHED BRONZE MOORING BITT. IT HAS AN APROX 6" SQUARE BASE, AND STANDS ABOUT 5 1/2" TALL, IT IS ABOUT 9" WIDE AT THE ARMS. IT HAS AN APROX 1 1/2" CHAIN HOLE ON ONE SIDE. THERE ARE 3/8" COUNTERSUNK HOLES...
THIS LISTING IS FOR A PAIR OF VINTAGE CAST SOLID BRONZE 6" CLEATS, IT'S A NICE FEATURE THAT THESE ARE SOLID CAST, NOT HOLLOW LIKE THE MAJORITY, I IMAGINE THEY ARE A LOT STRONGER. AT THE TIME THESE WERE LISTED, I LISTED ANOTHER PAIR FROM THE SAME BOAT IN A SEPARATE...
THIS LISTING IS FOR A PAIR OF VINTAGE WILCOX CRITTENDEN BRONZE 10 1/2" BOW CHOCKS. THEY MEASURE APROX 10 5/8"" LONG, BY APROX 1 5/8" WIDE AND STANDS ABOUT 2 1/8" TALL, IT HAS A SLOT FOR LINE THAT MEASURES ABOUT 1 5/8". PLEASE CHECK OUT MY O...
THIS LISTING IS FOR A PAIR OF VINTAGE PERKO BRONZE 6" SKENE/BOW BULWARK, OR TOE RAIL CHOCKS. THEY MEASURE APROX 6" LONG, BY APROX 1 1/4" WIDE (AT THE RAIL) AND STANDS ABOUT 2 1/2" TALL, IT HAS A SLOT FOR LINE THAT MEASURES ABOUT 1 1/8". PLEASE C...
Here we have a bronze , 3/4" pulley WILCOX-CRITTENDEN on a 5/8 " track slide , in good condition, I accept PAYPAL ONLY, INTERNATIONAL SHIPPING THRU EBAY ONLY
THIS LISTING IS FOR A PAIR OF VINTAGE CHROME (MOSTLY WORN AWAY) BRONZE 5" CHOCKS. THEY MEASURE APROX 5 1/4" LONG, BY APROX 1 1/8" WIDE AND STANDS ABOUT 1 1/4" TALL, THEY HAVE A SLOT FOR LINE THAT MEASURES ABOUT 1" WIDE. PLEASE CHECK OUT MY OTHER...
THIS LISTING IS FOR A VINTAGE ABI CAST CHROMED BRONZE PADEYE, WITH A REMOVABLE EYE, IT MEASURES ABOUT 4 1/4" LONG, BY APROX 3 1/8" WIDE, THICKLY CAST, APROX 1/4" THICK BASE PLATE. THE OPENING OF THE REMOVABLE EYE MEASURES APROX 1" WIDE BY 3/4" H...
This is 1 old cast iron chock. It measures about 19+1/2 inches long total and 6+1/8 inches wide and 6+5/8 inches tall. The chock 4+3/4 inches wide gap at the top for the rope. This chock is worn but has never been used. It is a weld on type but you could drill holes in...
